temperature expansion coefficient

英 [ˈtemprətʃə(r) ɪkˈspænʃn ˌkəʊɪˈfɪʃnt] 美 [ˈtemprətʃər ɪkˈspænʃn ˌkoʊɪˈfɪʃnt]

温度膨胀系数

化学



双语例句

  1. The sintering temperature and thermal expansion coefficient of the LSGM sample were determined using dilatometer.
    用热膨胀仪确定了LSGM的烧结温度及热膨胀系数。
  2. Effective temperature difference and liner expansion coefficient were employed to theoretically explain the development of residual stress caused by temperature of the laminate during curing process.
    提出应用有效温差并结合线膨胀系数对带有铝板复合材料层板固化成型过程中残余应力形成进行理论分析,其中残余应力主要考虑温度产生的。
  3. The calculation method is derived from the temperature dependence of the thermal expansion coefficient.
    根据热膨胀系数随温度变化的规律推导了热膨胀系数的计算方法。
  4. Effect of different raw materials and synthesis temperature on the thermal expansion coefficient of synthetic cordierite
    不同原料及合成温度对合成堇青石膨胀系数的影响
  5. The relations between glass composition and refractive index, dispersion, density, transformation temperature, softening temperature, thermal expansion coefficient, thermal optical coefficient are studied.
    研究了上述系统玻璃折射率、色散、密度、轻变温度、转化温度、热膨胀系数、热光常数和成份之间关系。
  6. The color glaze of low firing temperature and low expansion coefficient, to match the glaze tile made from common clay, was prepared in lead borosilicate system.
    采用铅硼硅熔块釉研制出同时符合普通粘土瓦坯的烧成温度低、热膨胀系数低这两个主要性能特点的釉料。
  7. A analysis model of equivalent temperature linear expansion coefficient is established and analyzed its property, via applying mechanics of composite material theory.
    应用复合材料力学理论,建立了反映层面影响的等效横向和竖向温度线膨胀系数分析模型,据此对碾压混凝土坝等效温度线膨胀系数的特性进行了分析;
  8. In this paper, a method more suitable to temperature compensation application by using coefficient of expansion instead of average coefficient is advanced.
    提出了一种更切合实际的温度误差补偿和修正方法:采用微分膨胀系数代替平均膨胀系数。
  9. Thermal deformation temperature and liner expansion coefficient of the composite were decreased.
    该复合材料的热变形温度有所降低,但线膨胀系数减小。
  10. In the case of a same measuring temperature range, the values of average thermal expansion coefficient ( TEC) slightly enhance with the decrease in the radius of Ln3+ cations.
    在同一温度范围内,Ln0.6Sr0.4Co0.8Fe0.2O3体系陶瓷的平均热膨胀系数随A位稀土离子半径的减小而略有增大。
  11. Temperature dependence of the abnormal thermal expansion coefficient and the band gap in CdTe
    CdTe反常热膨胀系数和能隙的温度关系
  12. It is suitably selected the small temperature expansion coefficient material to take the skeleton. According to the temperature to the coil output voltage influence, the revision is carried on under the different temperature.
    宜选用温度膨胀系数小的材料作为骨架,也可根据试验测出温度对线圈输出电压的影响,在不同温度下进行修正。
  13. And the influence of annealing temperature was also found to be caused by the expansion coefficient difference and martensitic transition.
    晶化处理温度对因热胀系数差异带来的热拉应力因马氏体相变而致的相变压应力均有不同程度的影响。
  14. The preliminary checkout and study have been made on performance of colloid powder polyphenylene grain thermal insulation mortar under moist heat condition using mensuration device of concrete temperature linear expansion coefficient.
    同时,利用混凝土温度线膨胀系数测定仪对胶粉聚苯颗粒保温浆料在湿热状态下的性能进行了初步测试和研究。
  15. The T-R characteristics may originate from the total function of volume expansion and temperature susceptibility of asphalt, the deference of volume expansion coefficient with heat between asphalt and graphite, and internal stress.
    而温敏产生的原因则为沥青的体积膨胀、石墨和沥青的热膨胀系数差异、内部应力和沥青温度敏感性共同作用的结果。
  16. The potential curve and the relationship between temperature and bulk modulus, linear thermal expansion coefficient, lattice constant and specific heat of fcc-Ir were calculated quantitatively.
    在此基础上,解释Ir的原子状态与晶体结构的关系,计算fcc-Ir的势能曲线,体弹性模量、线热膨胀系数、晶格常数和比热容等随温度变化的曲线。
  17. Preparation of High Temperature Resistant and Low Expansion Coefficient Glass
    耐高温低膨胀玻璃的研制
  18. The influences of lithia content on the melting temperature, mechanical properties and thermal expansion coefficient of low temperature frit were studied.
    本文研究了氧化锂加入量对低温熔块的熔融温度、力学性能、热膨胀系数的影响。
  19. In the metal-clad FBG temperature sensor, the FBG is bonded on the surface of metal fluted slice ( such as Cu and Al) with biggish thermal expansion coefficient.
    在铠装FBG温度传感器中,光栅粘贴于热膨胀系数较大的金属片(如Cu和Al)表面的线槽内。
  20. In this paper, a test method for investigating thermal expansion& temperature properties of flexible mold material for RTM process is established and the thermal expansion coefficient of the flexible mold material is obtained.
    建立了用于RTM工艺的软模材料的热膨胀&温度特性的测试方法,得到了软模材料的热膨胀参数。
  21. High temperature plasticity state of some metallic aluminum, high heat conductivity of melting aluminum and aluminum nitride, multiphase thermal expansion coefficient mismatch of corundum and aluminum nitride are the main reasons why the material has high thermal shock resistance.
    部分金属铝的高温塑性状态、金属铝及氮化铝的高导热性、刚玉与氮化铝的复相热失配等,是材料具有高抗热震性能的主要原因。
  22. The temperature coefficient of mass flow and density parameter of coriolis force mass flowmeter depends on the temperature coefficient of linear expansion and the young's modulus of the material, it can be obtained from the temperature coefficient of the resonance frequency.
    科氏力质量流量计的质量流量和密度参量的温度系数,与其材料的线膨胀系数和杨氏模量的温度系数有关,并可由谐振频率的温度系数求出。
  23. Vacuum hot bulge forming is a special forming process technique. According to material high temperature softening and stress relaxation principle, it utilizes the difference in the thermal expansion coefficient between workpiece and die to form the workpiece through thermal expansion force of the die under high temperature.
    真空热胀形是一种特殊的成形加工方法,它是利用工件和模具之间线膨胀系数差异,根据材料高温软化和应力松弛原理,通过模具在高温状态下热膨胀力使工件成形。
  24. Heat treatment temperature impacts on the thermal expansion coefficient of spodumene and eucryptite ceramics that the thermal expansion coefficient is declined by the increase of the heat treatment temperature. 2.
    研究了热处理温度对锂辉石和锂霞石热膨胀系数的影响。随热处理温度的升高,热膨胀系数呈减小的趋势。
  25. Based on principle of measurement chain compensation, a laser interferometry based on vacuum light path as optical frame has been put forward, and it adopts simultaneous temperature control, with which high accuracy integrated thermal expansion coefficient of large-scale component are obtained.
    本课题根据测量链补偿原理,采用的一种基于真空光路作为光学支架的激光干涉测长方法,采用同步控温的方式,实现了大尺寸构件整体热膨胀系数的高精度测量。